Products
VA1500
Specifications
Power: 8 Ω 1500 w. 4 Ω 1800 w. 2.7 Ω 2600 w.
Protection function: DC current (DC) protection, short circuit protection, current amplitude limiting voltage protection, temperature limiting protection.
Total harmonic distortion for clipping below 1kHz and 1dB: < 0.09%.
Total harmonic distortion 20Hz-20 KHZ 1 watt: < 0.058%.
S/N Ratio: > 110 dBA. Signal channel separation (crosstalk) at 1KHz) : > 70 dB. Frequency response 1 watt 8Ohm,20 Hz-20 KHZ: +/ -0.05 dB.
Damping control: > 400 8oh /1Khz.
Input impedance balance/unbalance: 20/10 kohm. Electronic balance input (NEUTRIK terminal).
Output connector: speakon Neutrik (2 x nlt4) (NEUTRIK terminal).
Cooling: convection before and after air cooling, temperature control speed.
ON/OFF: Single switch on the front panel.
Control: Each channel is provided with a level attenuator.
Indicator light: independent LED light for each channel;
Nominal voltage: 220 Volt AC 50 Hz.
Operating voltage: 190-250V AC. Soft start/power supply.
Size (LxWxH) : 483x430x88MM.
Weight: 16.5KG
Protection function: DC current (DC) protection, short circuit protection, current amplitude limiting voltage protection, temperature limiting protection.
Total harmonic distortion for clipping below 1kHz and 1dB: < 0.09%.
Total harmonic distortion 20Hz-20 KHZ 1 watt: < 0.058%.
S/N Ratio: > 110 dBA. Signal channel separation (crosstalk) at 1KHz) : > 70 dB. Frequency response 1 watt 8Ohm,20 Hz-20 KHZ: +/ -0.05 dB.
Damping control: > 400 8oh /1Khz.
Input impedance balance/unbalance: 20/10 kohm. Electronic balance input (NEUTRIK terminal).
Output connector: speakon Neutrik (2 x nlt4) (NEUTRIK terminal).
Cooling: convection before and after air cooling, temperature control speed.
ON/OFF: Single switch on the front panel.
Control: Each channel is provided with a level attenuator.
Indicator light: independent LED light for each channel;
Nominal voltage: 220 Volt AC 50 Hz.
Operating voltage: 190-250V AC. Soft start/power supply.
Size (LxWxH) : 483x430x88MM.
Weight: 16.5KG
